Fittings aus geschmiedetem C-Stahl nach EN-Normen
EN 10241
1 / 8" – 4"
Sockets with female thread
Pipe nipples with male thread on both ends
Black or galvanized
Sockets no.16, Pipe…
Geschweißte Rohrbögen aus C-Stahl nach EN-Normen
EN 10253-2
406.4 x 6.3 to 813 x 8
Manufactured from longitudinally welded pipes, with bevelled ends
P235GH to EN 10217
black, not oiled
3.1…
Nahtlose Fittings nach EN-Normen
EN 10253-1, EN 10253-2
21.3 x 2 mm – 508 x 12.5 mm
Elbows 45°, 90° and 180°, type 3D and 5D , in some cases 2D
Tees, Reducing tees, Caps, Eccentric…
Geschweißte oder nahtlose warmgeformte Hohlprofile
EN 10210-1 / 2
Square: 40 x 40 x 3 mm to 400 x 400 x 12.5 mm
Rectangular: 50 x 30 x 3 mm to 500 x 300 x 16 mm
12 or 13 m, other lengths…
Geschweißte kaltgeformte Hohlprofile
EN 10219-1 / 2
Square: 20 x 20 x 1.5 mm to 400 x 400 x 20 mm
Rectangular: 30 x 15 x 2 mm to 500 x 300 x 12.5 mm
6 to 15 m, special and longer lenghts…
Hartverchromte Stangen für Kolbenstangenanwendungen
Outside diameter 8 to 250 mm
Outside diameter 8 to 16 mm acc. to f8
Outside diameter 18 to 250 mm acc. to f7
other tolerances on…
Hartverchromte Kolbenrohre
EN 10305-1
16 x 3 mm to 170 x 9.5 mm
+C (BK) cold finished, hard
+SR cold finished and stress-relief annealed
+N normal annealed
Chromed
double chromed and NICROM…
Zylinderrohre, geeignet zum Honen oder Schälen und Glattwalzen
EN 10305-1/-2
30 x 5 mm to 300 x 25 mm
Outside diameter acc. to EN 10305-1/-2
+ SR (BKS)
Steel grade (EN)
E 355
other materials on…
Zylinderrohre EN 10305-1/2, gehont oder geschliffen und glattgewalzt
EN 10305-1/-2
30 x 5 mm to 300 x 25 mm
also available in inch sizes
Outside diameter acc. to EN 10305-1/-2
Inside diameter…